If your gold chain has snapped, your bracelet broken or your ring split, it is likely you have pondered the question:
"Can it just be soldered together?"
In many cases, yes soldering can be a fundamental technique employed to mend precious metal jewellery,
but there is a distinct difference between joining two broken fragments of metal together to form a whole and performing a repair suitable for the jewellery itself.
Before we solder anything we need to assess the cause of the break in the first place.
What Is Jewellery Soldering?
Jewellery soldering is a method used to join together parts made of precious metal.
Instead of just melting the jewellery together, a manufacturing jeweller uses an appropriately chosen jewellery solder at the prepared joint.
The area is carefully heated so that the solder flows into the joint and makes the connection.
Once the repair has been carried out, the area can be cleaned and refinished.
On a suitable piece of jewellery, a properly performed solder repair can leave the broken section securely joined and neatly finished.
What Types of Jewellery Can Be Soldered?
Soldering can be used on a variety of repairs for different types of jewellery.
Common examples of these include;
broken chains of gold
broken chains of silver
broken bracelets
split ring shanks
broken links of a necklace
clasps and fittings
pendant parts
jump rings
certain damaged settings
However, just because two pieces of metal can be physically soldered together does not necessarily mean that is the repair we would recommend, the condition of the surrounding jewellery also needs to be taken into account.
Can Gold Jewellery Be Soldered?
Yes.
Gold jewellery is routinely repaired by soldering.
This applies to different carats and shades of gold and although the methods used might vary depending on the individual item.
For instance, repairing a large solid gold chain can be very different from repairing a very fine or hollow chain.
The main thing is to use a suitable technique for the metal, construction and condition of the jewellery.
Can Silver Jewellery Be Soldered?
Yes, many items of silver jewellery can also be soldered.
Again we have to consider the actual piece of jewellery in question.
A simple break in a heavy silver item may prove a relatively simple fix
Whereas a very delicate, worn or intricate item may need a different approach.
Why Did the Jewellery Break?
This is the part that people often overlook.
Picture your chain has broken somewhere along its length.
We could just examine the broken link and solder it together.
But what if the link next to it is almost broken?
Or the chain has thinned in multiple places?
In this case, while we have fixed the place where you asked us to fix, we may not have fixed the bigger issue.
This is why we will look at:
The break itself.
The surrounding links or metal.
Previous repairs.
Wear in general.
And if the jewellery is worth it in the first place to repair.
Soldering Doesn't Replace Missing or Worn-Out Metal
This is an important distinction.
If two sound sections have been separated, soldering may be precisely the solution.
If the jewellery has been worn down to practically nothing in one or more places, however, it may not be advisable to repeatedly solder new metal onto old.
It may be necessary to rebuild, replace, or even perform some more invasive form of repair.
A split ring with a shank worn down to practically nothing, for instance, might need more than just a soldered split closed.
An old broken chain may be crying out to have its links replaced, rather than simply soldering the broken place.
Can a Broken Chain Be Soldered Back Together?
Very often, yes.
Broken gold chains are one of the standard repairs we do in the jewellery bench.
But different types of chain will require different approaches to the job.
We need to think about:
whether it's solid or hollow,
the style of the links,
where it broke,
how worn the links around this point are,
if it's been previously repaired,
plus how fine or heavy the chain is.
We'll go into more detail on this in our dedicated guide:
A Good Repair Starts Before the Soldering Begins
The actual soldering may only be one part of the job
Before getting to that stage, an experienced manufacturing jeweller needs to work out what it is that should actually be joined and whether the surrounding jewellery is strong enough.
At The Jewellery Mechanic, our repairs are carried out in-house by experienced manufacturing jewellers
With over 35 years of hands-on jewellery experience, we've repaired everything from fine broken chains to heavily worn rings requiring considerably more than a simple solder joint.
The aim isn't just to make the break disappear. It's to determine the correct repair for the jewellery in front of us.
Can Broken Gold Chains, Rings and Bracelets Be Soldered?
Yes, many broken pieces of gold and silver jewellery may be soldered.
But it is important to note that whether soldering is the appropriate repair or not, depends on what has been broken and the condition of the surrounding metals.
A clean break in otherwise healthy jewellery is a world apart from a break caused by years of wear.
Let's take a look at some of the most common repairs.
Can a Broken Gold Chain Be Soldered?
In many cases, yes.
If one link is broken but the others are all okay, we may be able to repair the broken link and solder it in place.
But we will also need to check the links around the break.
If more than a few have become very thin, it may be that repairing just one link will result in a new break farther down the chain.
Does the Style of Chain Matter?
Certainly.
Gold chains can be made in different constructions like for example:
- Curb
- Belcher
- Figaro
- Rope
- Trace
- Box
- Snake
- Spiga
- Hollow chains
Depending on the construction, sometimes a repair is easier to perform and sometimes more difficult.
For example, with some chains that have intricate patterns or that use very fine wire, extra care is needed during the repair because the links are smaller and the solder needs to be applied in a controlled manner.
Hollow chains can also be challenging since the walls of the links are thinner then they appear.
This is why it's important to see the chain in person and understand what kind of repair it needs.
Can a Broken Ring Be Soldered?
Yes, a ring that has broken can sometimes be soldered back together.
An example is a ring that has cracked or completely split at the bottom of the shank.
But again, we have to ask:
Why did it split?
If the shank is still significant and the break is relatively isolated, joining the ring is probably a good option.
If the bottom of the ring has worn down to be very thin after years of wear, simply soldering the crack shut may not be the best option.
The worn-down part may have to be reconstructed or replaced.
Can a Bracelet Be Soldered?
Many gold and silver bracelets can also be repaired using soldering.
Typical issues include:
Broken links
Failed jump rings
Damaged clasp connections
Broken safety chains
Components separating from the bracelet
The construction of the bracelet is also a huge consideration.
A substantial solid bracelet provides us with a considerable amount more metal to work with than a lightweight hollow design.
What About Broken Clasps and Jump Rings?
Sometimes the chain or bracelet itself is perfectly sound and the issue is just the connection to the clasp.
The jump ring could have opened, worn through or broken.
Depending on its condition it might be possible to repair the existing component, or it might make more sense to completely replace the worn part.
Another example of why soldering isn't always the answer to every break.
If a component has worn away, sometimes replacing it is actually the preferable repair.
What About Pendants and Other Jewellery?
Soldering is great for rings, chains and bracelets, but that's not the only place it can be used.
It can also be utilised during repairs to:
Pendants.
Necklaces.
Brooches.
Earrings.
Settings.
Clasps and fittings.
The important thing is the same as always, is there enough sound metal to make a secure repair?
A Break Can Tell Us Something About the Jewellery
When jewellery breaks, its position tells us where the problem area might be.
If a chain has broken once somewhere due to an accidental catch, then this might be the only incident
but, if it has been repaired several times in the same place and continues to fail, then it is likely that the whole chain is subject to stress and will need a total renewal.
Similarly, a ring that fails in the same place, usually in the shank at the split, should have the shank examined for its thickness and condition before being soldered again and again.
At The Jewellery Mechanic, we would prefer to inform clients when an item is due for a significant repair rather than attempt to keep repairing the same area due to poor construction or material quality.
Our aim is to give the client a practical repair to be able to enjoy the piece in the correct manner.
How Strong Is a Soldered Jewellery Repair?
A properly executed solder repair can be both sound and enduring if the jewellery to either side of the area being repaired is in good condition.
However;
The reliability of a solder repair is only ever as good as the condition of the jewellery surrounding it.
To illustrate the point; soldering a broken link where either side is in sound, healthy condition, is a world away from soldering the same link on a chain where several of the links either side are worn too.
Is the Solder Joint Weaker Than the Original Jewellery?
Not necessarily.
When done right, on clean metal, the repair can be strong.
It's often the surrounding metal that's weakened.
Say a chain link is worn to a fraction of its thickness, and finally snaps.
We repair the damaged link.
The soldered part may be good and strong, but the next weakest point is the thinned metal.
And the chain can easily break at this point.
Why Has My Chain Broken Next to an Old Solder Repair?
This is an example of a situation which customers can sometimes fall into the trap of thinking this.
They look at the previous repair job and think about it and think "obviously the soldering failed".
This isn't always the case though.
If the original repair is still perfectly fine and the break is straight by it, then it is more likely that the chain was worn down where the repair was and the link next to it simply wore down
This often happens on older chains which have thinned out a bit. The original soldering could still be perfect, but the next weakest link has given up.
Can a Chain Be Soldered More Than Once?
Potentially, yes.
A chain having had a previous repair does not automatically prevent further repair.
It all depends on the state of the chain.
If a chain has had an isolated break and is otherwise sound, a further repair may be perfectly acceptable.
But if we see:
- Several previous solder repairs
- Multiple worn links
- Links becoming noticeably thin
- Repeated breaks at multiple points
- General stretching/distortion
then I think we would have to question whether a further solder repair represents good value.
There will come a point when repeated breakages indicate the chain has simply become worn.
Does More Solder Make a Repair Stronger?
No.
A good jewellery repair does not consist of laying a big glob of solder on top of the broken part.
The joint must be correctly prepared, aligned and soldered using the right amount of solder.
Too much solder does not necessarily produce a better repair.
On the contrary, it may make the joint look unsightly.
The object of soldering is to make a satisfactory repair which complements the original jewellery.
Will the Repair Be as Strong as New?
It depends on the situation.
If we are talking about repair of a fairly new chain with a damaged link the situation is completely different from the repair of a jewellery piece worn every day for 30 years.
Therefore, it would be irresponsible to promise that every soldered repair makes the jewellery item as good as new.
In reality, the repair may be perfect, but other details may give away the age of the piece.
This must be taken into consideration when evaluating the repair needed.
When Is Soldering Not Enough?
It depends on the situation.
If we are talking about repair of a fairly new chain with a damaged link the situation is completely different from the repair of a jewellery piece worn every day for 30 years.
Therefore, it would be irresponsible to promise that every soldered repair makes the jewellery item as good as new.
In reality, the repair may be perfect, but other details may give away the age of the piece.
This must be taken into consideration when evaluating the repair needed.
A Strong Repair Starts With an Honest Assessment
At The Jewellery Mechanic, we'll assess the jewellery to see whether soldering is an appropriate course of action.
Should there be the possibility to repair the break, we'll talk you through how we could do it;
should the surrounding metal be badly worn such that we feel the repair should be more substantial, we'll explain that to you too;
and if we have a chain which has reached the point where it's no longer practical to continually solder individual breaks, we'd rather let you know that.
With over 35 years' hands-on experience, our aim isn't to just get another solder joint on there - it's to do the appropriate repair for the state of the jewellery you happen to have.
Will You Be Able to See Where Your Jewellery Has Been Soldered?
With a properly made solder repair, the goal is that the repaired area blends in as much as possible with the surrounding area.
Once the soldering has taken place, any remaining residue is removed and finishing work commences.
On many items of jewellery it can be challenging to see where the repair has taken place.
Whether or not a solder repair can be disguised depends on the type of jewellery, where the break occurred and its condition prior to repair.
What Makes a Solder Repair Less Visible?
A good repair always begins with preparation!
The breaks need to be properly aligned before they can be joined together.
Once soldered, the repair can be carefully shaped back to its approximate shape to fit the original design of the jewellery.
This is especially important on parts like:
Ring shanks
Chain links
Bracelet links
Pendant parts
Plus clasps & fittings
We wouldn't want a lump of solder to come out where the break was!
The repair should also be neat as well as being strong.
Will You See the Join on a Gold Ring?
On a properly gold ring, a properly repaired join can often be disguised very well in the shank.
After soldering, it can be shaped and polished so that the repair follows the shape of the original ring.
However, if the shank is extremely worn, distorted or previously repaired several times, there may be more work involved than simply joining the split.
In that case, rebuilding or replacing part of the shank may give a better result.
What About a Broken Gold Chain?
Chains may well be different due to the repair being carried out on a very small individual link.
In some styles a neat repair can be extremely difficult to determine during normal wear.
In others, particularly very fine hollow or intricate chains there may be some evidence of the repair when examined closely
The priority has to be a secure repair without unnecessarily altering the appearance or movement of the chain.
Does the Colour of the Solder Match the Jewellery?
Jewellery solder is chosen according to the precious metal to which it will be joined.
The aim is to make the repaired join inseparable from the rest of the jewellery after it has been finished.
However,
different gold alloys and sometimes even different pieces of jewellery may differ slightly in colour.
This is yet another reason why jewellery repair is a much more involved process than simply melting some solder on a broken surface.
The materials and the finish are also an important part of the repair.
What About White Gold?
Jewellery solder is chosen according to the precious metal to which it will be joined.
The aim is to make the repaired join inseparable from the rest of the jewellery after it has been finished.
However,
different gold alloys and sometimes even different pieces of jewellery may differ slightly in colour.
This is yet another reason why jewellery repair is a much more involved process than simply melting some solder on a broken surface.
The materials and the finish are also an important part of the repair.
What If the Jewellery Has a Pattern or Engraving?
This may complicate the repair process.
If the break goes through
engraving,
decorative patterns,
textured finishes,
or intricate links,
we may need to carefully reconstruct some of these details after the welding is done.
The more complicated the design, the more painstaking the repair will be.
Can We Promise Every Solder Repair Will Be Invisible?
No - and we'd prefer to be realistic about that.
Some repairs can be made to blend in exceptionally well
while others may be visible if you know where to look (and have a magnifying glass handy!).
Whether the repair will be noticeable or not will depend on:
the type of jewellery
where it has broken
how much of the metal is left
any previous repairs
the finish of the piece
its construction
and
the amount of damage around the break
We always endeavour to make the repair secure, neat and sympathetic to the original piece.
For a more detailed answer regarding the visibility of solder repairs, please see:
🔧 INSERT IMAGE HERE
(Finished gold jewellery repair under magnification showing a neatly blended solder joint)
Can Jewellery With Diamonds and Gemstones Be Soldered Safely?
Yes, jewellery made with diamonds and gemstones may frequently be soldered, but extra precaution must be taken when applying heat close to stones.
Here is where jewellery soldering becomes more complex than just connecting 2 bits of metal.
Various gemstones exhibit different tolerances to heat, and the construction of the jewellery indicates the manner in which the repair should be executed.
Before undertaking the work we need to know what stones we are dealing with and how close they are to the area in which the repair will take place.
Can You Solder a Diamond Ring?
Often, yes.
Soldering is regularly used when repairing gold and platinum diamond rings.
For example, a ring could have:
a split at the bottom of the shank
broken around a previous sizing joint
developed a crack
needed a new section of metal
and needed work around part of the setting
But the fact that there are diamonds present doesn't mean we just apply heat without considering the rest of the ring.
The complete piece needs to be assessed first.
Do Diamonds Get Damaged by Soldering?
Diamonds are exceptionally hard minerals, but hardness is not the same thing as being impervious to damage during jewellery repair
A manufacturing jeweller must always carefully control the repair process
Considerations should include
the location of the diamond
its closeness to the setting
the presence of other gemstones
the condition of the stone and its setting
plus
the most appropriate technique for repairing that particular ring
This is why jewellers would never deal with each and every stone-set ring using the same procedure.
What About Sapphires, Rubies, Emeralds and Other Gemstones?
it becomes apparent just how important identification is
Different gemstones can often have very different requirements when it comes to repair procedures.
A technique which is perfect for one kind of jewellery could potentially ruin a piece made with a different type of stone.
Some gemstones may also require additional precautions, while a particular repair job could benefit from removing a stone before carrying out any work involving heat, in order to protect it.
These decisions are made on a case-by-case basis.
Sometimes the Stone Needs to Come Out First
Removing the gemstone isn't essential for every solder repair. However, there are times when it could be the more sensible option.
There are several factors to consider before making this decision which include:
The gemstone itself
The condition of the set stone
The style of setting
How close the stone is to the area requiring repair
The amount of work involved in repairing the piece
The construction of the jewellery itself
If the gemstone does have to be removed, it may be necessary to repair the setting before re-setting the stone back into place once the soldering is complete.
We Also Need to Check the Settings
Not only do we have to be mindful of the effect that heat can have on the gemstone itself, but we also have to consider the condition of the set and any claws present in the item being repaired. If we are repairing an older stone set ring for example, we'll also be checking the claws and settings before we start the soldering process itself. The ring may well have:
Loose stones
Worn claws
Thin settings
Or previous repairs
If we find a problem during this initial inspection, it would be prudent to discuss it before the soldering process begins.
What Happens After the Repair?
Once the soldering and finishing processes have been completed, it is important to check over the stones and settings one more time.
In order to ensure that the jewellery has been properly repaired, and that the integrity of the stones has not been compromised, depending on the pieces, some of the following may be done:
Check settings
Refinishing or polishing the repaired area
Polishing
Cleaning
Rhodium plating white gold, if applicable
Final inspection using a loupe
The above steps will vary depending on the jewellery in question.
Stone-Set Jewellery Needs More Than a Quick Solder
That's why experience counts when it comes to repairing jewellery incorporating diamonds and precious gems.
The question is not simply a matter of:
"Can two pieces of metal be soldered together?"
But also, "how can the repair be conducted in such a way as to protect the integrity of the remaining jewellery?"
At The Jewellery Mechanic all our repairs are done in house by qualified manufacturing jewellers, who will assess the type of metal, the setting of any stones, their location and recommend a repair method that takes all these factors into account.
When Is Soldering NOT the Right Jewellery Repair?
A solder repair is an extremely useful technique for jewellery repair, but it isn't always an option to fix broken jewellery.
Sometimes a customer will bring us a chain, bracelet or ring and ask: "Can you just solder that?"
Technically, we might be able to join the broken area together.
But if the surrounding metal is badly worn, another solder joint may not be the repair we'd recommend.
A good repair is about more than putting the broken jewellery back together again.
It's about determining if the repaired item will be something that the customer would consider suitable to wear after the repair is done.
1. The Metal Is Too Thin
Precious metal tends to wear away over time, especially on jewellery that is worn every day.
A ring shank can become papery thin at the bottom.
Chain links can wear where they are constantly rubbing against each other.
Bracelet links can become progressively thinner until something finally breaks.
If there isn't enough sturdy metal surrounding the damaged area, simply soldering the break closed may not solve the underlying problem.
The worn section may need to be replaced or rebuilt with new metal.
2. When a Chain Keeps Breaking
One break doesn't necessarily mean there's something wrong with a chain.
But, many breaks can.
If you've had a chain repaired multiple times before, and it keeps breaking in other places, that can suggest there's wear to the whole chain.
Every solder repair job may successfully mend the break(s), but it cannot recover the metal that's worn off on every single other link.
It becomes impractical/uneconomical to keep repairing breaks in the chain at some point.
3. When A Component Should Be Replaced, Rather Than Repaired.
Sometimes a worn component can be replaced for a better repair than trying to repair the same worn spot over and over again.
For example, a badly worn:
- jump ring,
- clasp,
- chain end,
- link or
- small fitting
can be replaced with a new piece of the correct kind. We can then securely attach the replacement to the chain instead of trying to keep repairing the worn spot.
4. When a Ring Needs a New Section of Shank
If a ring has simply split but the surrounding shank remains strong soldering may be appropriate.
However, if the bottom of the ring has become extremely thin, joining the split doesn't replace the missing metal.
In that situation we may recommend removal of the badly worn section and fitting of new matching precious metal.
This restores thickness and strength rather than simply closing the crack.
5. When Previous Repairs Have Built Up
Older jewellery can sometimes arrive in the workshop with several previous solder repairs.
This doesn't automatically mean it couldn't be repaired again.
But we need to consider what is actually left of the original jewellery.
If we're repeatedly repairing:
One link after another.
The same worn section.
Multiple cracks.
then another small solder repair may simply delay the next problem.
Sometimes a Bigger Repair Is the Better Repair
This is an extremely important aspect of jewellery repair.
The cheapest repair available is not necessarily the best-value repair.
If I have a ring that has split due to the whole of the shank being very thin, soldering the split may have a cheaper initial cost than replacing the thinned section.
However, if the ring splits again, as it will do with ease because the area in which the split has occurred is still thin, the repair has proved to be not good value with the money spent being wasted.
Sometimes the best-value repair is to replace the worn area with new metal so that the jewellery has an increased chance of continuing to be worn.
And Sometimes We May Recommend Not Repairing It
There are times when jewellery has worn or broken too many times already for another repair to make sense.
That's especially true of very fine or hollow chains that have been repaired several times already and are likely to snap at the next soldering.
We're much better at being honest about that then continuing to repair it time and time again just to continue charging you.
At The Jewellery Mechanic this is why we advise you on the condition of the whole item and what it will take to restore it to your satisfaction.
Sometimes this is a simple solder repair.
Sometimes it's something more involved.
And sometimes the best option is to leave well enough alone.
The important thing is to make a repair decision based on the situation and not just default to solder repair whenever something breaks.
Frequently Asked Questions About Jewellery Soldering
Can broken gold jewellery be soldered back together?
Many broken pieces of gold jewellery can indeed be soldered back together. It depends on where the break has occurred, the construction and the amount of sound metal around the break.
Can a broken gold chain be soldered?
In many situations, yes. A broken link can often be repaired and soldered securely. However, it's important to check how worn the links around the break are too. If many of the links are already slim, repairing just the broken link may not solve the whole problem.
Can silver jewellery be soldered?
Yes. Many pieces of silver jewellery can be repaired using soldering techniques. As with gold, the condition of the jewellery should be assessed to decide what repair is appropriate.
Is a soldered jewellery repair strong?
A properly prepared and soldered joint can be strong and secure. However, the jewellery around the break/repair is also important. If the links either side of a chain break, or the shank of a ring, are already badly worn, they can be a potential weak spot even if the solder joint itself is secure.
Will I be able to see where my jewellery has been soldered?
Sometimes the repair can be blended in completely, and may be hard to see when worn. Other times, a repair may just remain slightly visible if you know where to look. It depends on the jewellery, where the break was, its condition, and original finish.
Can you solder a ring with diamonds in it?
Often, yes. However, stone set jewellery always needs to be carefully assessed before any heat is applied. The type of stones, their position, how they're set, and the location of the repair are all important considerations.
Can a chain be soldered more than once?
Potentially. Having one solder repair doesn't mean a second one can't be made. However, if the chain has needed several repairs, and is continually snapping in different places, this can be an indication that the whole chain is worn and may need to be rebuilt rather than repeatedly repaired.
Why has my chain broken next to the previous repair?
It doesn't necessarily mean that the original solder joint has failed. If the repaired joint is intact, it's possible that simply the link either side has worn thin and become the next weak point. This is especially true with older chains that generally show signs of wear.
Can hollow gold jewellery be soldered?
Some hollow gold jewellery can be repaired, but it can be more challenging due to the thinness of the walls. As with solid gold, each piece of hollow gold jewellery needs to be assessed to see whether a secure repair is possible.
Can a snapped ring be soldered back together?
Often, yes. But if the ring has snapped because the bottom of the shank has worn very thin, soldering the ring back together may not be enough. The worn section may need rebuilding or replacing.
How much does jewellery soldering cost?
There is no single price for every solder repair. The cost depends on many factors including:
- Which type of jewellery
- The type of metal
- Where it has broken
- The construction of the piece
- If there are any stones present
- The condition of the surrounding metal
- Whether any additional rebuilding or replacement parts are required.
A simple chain repair and a badly worn diamond ring that requires new metal to be added are two very different jobs. The condition of the jewellery usually needs to be assessed first in order to give an accurate quote.
If Your Jewellery Has Broken, Stop Wearing It
If a chain, ring or bracelet has started to split or partially break, we'd recommend taking it off and not wearing it rather than continuing to wear it. A small break can get worse, and if the jewellery has diamonds or other stones, further distortion can potentially affect their settings too.
Keep all broken pieces you have, even tiny links or fittings and send or bring them along with the jewellery for assessment.
Broken Gold or Silver Jewellery? Let Us Take a Look
If your chain has snapped, your bracelet has broken or your ring has split, do not despair.
In many cases, gold and silver jewellery can be repaired
However, it is not enough to simply solder the two ends together.
To decide what action to take, we must ask ourselves a number of questions:
- Why has it broken?
- Is the surrounding metal still sound?
- Has it been repaired before?
- Would soldering be enough or does the worn metal need to be replaced?
- This is why we examine the item before beginning any repairs.
This is why we examine the item before beginning any repairs.
Keep All The Broken Bits!
If there are any broken bits that are separate, keep them!
This includes links, clasps, jump rings, small fittings, broken bits of your bracelet, etc. Even broken bits from a pendant can be used to aid us when examining the damage and figuring out how best to repair your jewellery - so do not throw them away!
Â
Jewellery Soldering and Repair by The Jewellery Mechanic
At The Jewellery Mechanic, your jewellery is repaired by our in-house trained manufacturing jewellers.
With over 35 years' hands-on jewellery experience we repair broken:
-
Gold chains
-
Silver chains
-
Rings
-
Bracelets
-
Pendants
-
Clasps and fittings
-
And many other sentimental items
We will always examine the break and surrounding metal in your broken item before suggesting a repair.
If a simple solder repair is an option we'll explain what's needed to make it right.
If the item is badly worn and a better repair is required we'll explain this also.
And lastly, if we feel that soldering an extremely worn item several times isn't going to be an acceptable repair, we'll explain that too.
Â
The Aim Isn't Just to Join It — It's to Repair It Properly
There is an important difference.
A broken piece of jewellery can often be made to look repaired by joining the broken area.
But as manufacturers to the trade we need to know if that repair makes sense to the whole piece.
Sometimes soldering is the right solution
Sometimes new metal or a replacement component is required.
And sometimes an older piece needs a more extensive restoration.
The correct answer will always be dictated by what is on our bench.
Send Us Your Broken Jewellery for Assessment
If you have a broken chain, bracelet, ring or other piece of jewellery that has been gathering dust in a drawer as you weren't sure if it could be repaired, why not send us a message to tell us about the item, and we'll take a look.
We'll inform you of the damage and possible repair options before any work takes place.
👉 Get a quote for your jewellery repair
Â